Monty Montgomery: Old Project Progress Pictures: The Laser Fist of Heaven

I’ve built up quite a pile of project pics I took meaning to post, then never got around to it.

OK, so, laser cutter.

China sells a lot of cheap cheap cheap “It’s so cheap I can’t believe that price covers shipping let alone materials” maker tools. Some are better than others, and many barely work for their intended purpose out of the box. Overall, plan to get what you pay for, and I mean that in both the good and bad senses.

Most of these tools make decent starting kits though! Research a bit, then choose the kit with the most parts you want to keep (or the fewest you plan to toss).

I bought a K40 variant (SL320) on AliExpress, and I’m building it into a complete cutter now. It has a decent X/Y stage, came with a good tube (which I promptly broke while being an idiot), a larger than normal case, tubing, flow sensor, air assist head, and a better than average power supply. It also came with an exhaust fan and aquarium pump I don’t plan to use, a useless Z-stage, and an air pump that makes half of the ideal.

Others are already doing a good, detailed job of documenting their K40 builds. I’ve been referring to Dons Things and Tims Machines extensively for tips in my own build. So, I’m going to stick to pictures, terse captions, and the few things I’ve uncovered that I haven’t seen solved elsewhere.

I don’t want my water cooling tubing dangling out back to an open bucket and a failure-prone aquarium pump, and I’m pretty sure an external chiller is overkill. I want a fully internal, closed water cooling loop. Water cooling may be useless (if still cool) for PCs these days (ha ha, see what I did there), but it does mean nice cooling parts are cheap and plentiful for other uses.

So, step 1: shoehorn in the biggest possible radiator core. And by biggest possible, I mean, “move everything else as far out of the way as I can to make more room”. That starts with lifting the laser tube tray up by about 2cm. The original mounting flange is just tack-welded on. It’s easy to pop it right off.

The limitation to how much higher I can go is actually the clearance of the mirrors along the left side, and the XY stage fitting under the door opening lip in the front. You can see I also nibbled off about half the depth of the left side of the door opening lip.

Aside: freehand nibbling is really hard to get straight.


Source From: fedoraplanet.org.
Original article title: Monty Montgomery: Old Project Progress Pictures: The Laser Fist of Heaven.
This full article can be read at: Monty Montgomery: Old Project Progress Pictures: The Laser Fist of Heaven.

Advertisement


Random Article You May Like

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*